Honda 2010 CBX 250 Workshop Manual page 193

FRONT WHEEL/SUSPENSION/STEERING
Tighten the fixing bolts the higher bridge to the spe-
cified torque.
TORQUE: 22 N.m (2,2 kg.m)
In the event that has removed the bolt top of the
fork, install and push the pair specified.
TORQUE: 22 N.m (2,2 kg.m)
Install the following components:
Fenders front page (2-4)
Clamp front brake (page 15-6)
Front wheel (page 13-13)
Steering column
DISMANTLING
Remove the following components:
Forks front (page 13-4)
Handlebars (page 12-5)
Casing for the light (page 19-4)
Table of instruments (page 19-6)
Remove the cover of the nut of the steering column.
Using the special tool, remove the nut of the steering
column and the washer.
Tool:
Key socket of the steering
column, 30 x 32 mm
13-22
BOLT TOP OF THE FORK
NUT OF THE STEERING COLUMN/WASHER
KEY SOCKET
07716 – 0020400
OF THE steer-
ing column
CBX250
FIXING BOLTS
LID