Honda 2010 CBX 250 Workshop Manual page 184

CBX250
Apply grease to lip of the new dust. Then, install the same in
the left side of the body of the wheel.
Lubricate the gear box of the speedometer with grease. Install the
gear box of the speedometer in the body of the wheel, align-
ing the tabs of retainer with the slots in the gear box of the
speedometer.
Install the collar right side.
Install the front wheel between the forks, situating the
brake disc between the pads of the clip of the brake. Be
careful not to damage the brake pads.
Place the highlight of the gearbox speedometer against
the limiter, in the fork left. Apply a thin layer of grease to the
surface of the bolt front axle.
Install the bolt front axle from the left side. Hold the bolt
and fasten the nut of the front axle to the specified
torque.
TORQUE: 59 N.m (5,9 kg.m)
Tighten the bolt fixing of the axle.
Install the cable of the speedometer and mount with the
screw.
FRONT WHEEL/SUSPENSION/STEERING
Gear Box OF THE SPEEDOMETER
COLLAR SIDE
Gear Box OF THE SPEEDOMETER
NUEVO
GRASA
DUST COVER
LIMITER/HIGHLIGHT
CABLE OF THE SPEEDOMETER
SCREW
BOLT AXLE/
NUT
FIXING BOLT