Camshafts; Height Of Lobe Of Camshaft; Eccentricity Of Camshaft; Slack Oil Cam - Honda 2010 CBX 250 Workshop Manual

CBX250
INSPECTION

Camshafts

Inspect the surface of the stumps of the supports of
camshaft with regard to excoriations, scratches or signs of
lubrication deficient.
Inspect the holes of oil from the stands with regard to
obstruction.

Height of lobe of Camshaft

Inspect the surfaces of the lobes of the camshaft with regard
to excoriations, scratches or signs of lubrication deficient.
Use a micrometer to measure the height of each lobe of
camshaft.
ADM
Service
Limit
ESC
In the event that the lobe is damaged or excessively worn,
inspect the following:

Eccentricity of Camshaft

Support the two ends of camshaft in blocks type V . Check
the eccentricity of camshaft using an indicator of quadrant.
Service Limit

Slack oil cam

Remove the support of camshaft (page 7-6).
Wipe any residual oil of the stumps of the cylinder head, cam and
housing cam.
Place the camshaft in the cylinder head and put a band of plastigage
in each stump.
SUPPORTS OF THE
CAMSHAFT
36,94 mm
36,97 mm
0,10 mm
CAMSHAFT
LOBE OF CAMSHAFT
INDICATOR OF QUADRANT
CYLINDER HEAD/VALVES
PLASTIGAGE
7-7