Service Standards; Motorcycle - Honda 2010 CBX 250 Workshop Manual

CBX250
GENERAL INFORMATION

SERVICE STANDARDS

1. Use only spare parts, oils and lubricants genuine HONDA or recommended by HONDA or their equivalents. The spare
parts that do not respond to the specifications of HONDA can damage the motorcycle.
2. Use the tools specially designed for this vehicle, for which prevent damage or incorrect fitting.
3. Only use metric tools to make services to the motorcycle. The bolts, nuts and bolts metrics are not interchangeable
with elements of fixing British. The use of tools and fixers incorrect can damage the motorcycle.
4. Install gaskets, rings o, smugglers hendidos and plates of locks new when carrying out the assembly.
5. By tightening bolts, screws or nuts in series, starting with the larger diameter or by the bolts or screws. Tighten value
specified, gradually, and in sequence mixed, unless otherwise specified a different sequence.
6. Clean the pieces with solvent clean after the dismantling. Lubricate the surfaces of slippage before mount again.
7. After assembly, verify all the pieces with regard to its installation and operation.
8. Install all electrical cables as shown in the pages of 1-18 to 1-23, Past of Cables and Cabled .
1-2