Table of Contents
Advertisement
CBX250
SERVICE INFORMATION
INVESTIGATION OF FAULTS
CHANGE OF FLUID BRAKE
/ PURGA DEL AIRE
SERVICE INFORMATION
GENERAL INSTRUCTIONS
d
Disks or brake pads contaminated reduce the performance of braking. Discard the pills contaminated and wipe the
disk with a degreasing agent of brake of high quality.
i
Avoid shed fluid brake in painted surfaces, surfaces of plastic or in parts of rubber. Place a cloth on these parts, to
make services in the brake system.
•In this section describes the maintenance of the hydraulic system of front brake.
•System must be purge after the start of the hydraulic system, or if the brake is elastic.
•To supply, do not allow pollutants (dirt, water, etc. ) entering the deposit open.
•Always use fluid brake DOT 4 new, withdrawn from a sealed. Do not mix different types of fluid, because estes may be
incompatible.
•Always check the functioning of the brake, before driving the motorcycle.
SPECIFICATIONS
Fluid brake specified
Wear indicator of the brake pads
Thickness of brake disc
Twist of the brake disk
D.I. master cylinder
D.E. of piston of master cylinder
D.I. The cylinder of the clip of the brake
D.E. The piston calliper brake
TORQUE VALUES
Bolt banjo hose brake
Bolt the support of the cylinder master striker
Screw cap deposit of master cylinder
Screw breaker of the light of front brake
Nut pivot of the brake striker
Bolt pivot of the brake striker
Bolt fixing of the clamp front brake
Bolt of bolt of the clamp front (main)
Bolt of bolt of the clamp front brake (secondary)
Clip of the brake pads
Cap bolt of the pads
Valve purge of the clip of the brake
15. HYDRAULIC BRAKE
15-1
15-2
15-3
Item
DISK/brake pads
MASTER CYLINDER
CLAMP brake
Value
DOT 4
—
3,8 – 4,2
—
11,000 – 11,043
10,957 – 10,984
25,400 – 25,450
25,318 – 25,368
34 N.m (3,4 kg.m)
12 N.m (1,2 kg.m)
1 N.m (0,1 kg.m)
1 N.m (0,1 kg.m)
6 N.m (0,6 kg.m)
6 N.m (0,6 kg.m)
26 N.m (2,6 kg.m)
22 N.m (2,2 kg.m)
18 N.m (1,8 kg.m)
18 N.m (1,8 kg.m)
2 N.m (0,2 kg.m)
5 N.m (0,5 kg.m)
15-4
15-6
15-10
Unit: mm
Service Limit
—
Until the slot
3,5
0,10
11,055
10,945
25,460
25,31
Bolt ALOC: replace it with
a new one
Advertisement
Table of Contents
Troubleshooting
