System Settings Procedure; Step 1 Entering System Administration Mode; Step 2 Entering The System Administrator User Id And Passcode; On The [Machine Information] Screen - Fuji Xerox ApeosPort-V 4020 Administrator's Manual

5 Tools

System Settings Procedure

To change or customize the system settings, enter the System Administration mode.
This section describes the basic procedures for system settings. The following shows the
reference section for each procedure.

Step 1 Entering System Administration Mode ........................................................................................................................92

Step 2 Entering the System Administrator User ID and Passcode .....................................................................................92

Step 3 Selecting [Tools].................................................................................................................................................................93
Step 4 Selecting a Setting Item on the [Tools] Screen..........................................................................................................93
Step 5 Setting a Feature ...............................................................................................................................................................95
Step 6 Exiting System Administration Mode ...........................................................................................................................95
Step 1 Entering System Administration Mode
1
Press the <Log In/Out> button or the login
information field on the touch screen.
5
Step 2 Entering the System Administrator User ID and Passcode
To enter the System Administration mode, enter the system administrator's user ID. If
[Passcode Entry for Control Panel Login] is set to [On] under [Tools] > [Authentication/
Security Settings] > [Authentication] > [Passcode Policy], you need to enter the passcode.
We recommend that you change the system administrator's user ID and passcode
immediately after installing the machine.
For more information on how to change the passcode, refer to "System Administrator Settings" (P.245).
1
Enter the system administrator's user ID with
the numeric keypad or the keyboard displayed
on the screen, and select [Enter].
When a passcode is required, select [Next] and
enter the system administrator's passcode, and
then select [Enter].
Note
92
• The default user ID is "11111".
• The default passcode is "x-admin".
• The screen may differ depending on the settings of the machine.
• The <Log In/Out> button is lit when the machine enters the System Administration mode.
Job Machine
ABC DEF Log In / Out Status Status
2 3
Dial
Pause
JKL MNO
Clear All
5 6
Interrupt Stop
Speed
Dial
TUV WXYZ
Start
8 9
0 ＃ C
Power Data Error
<Log In/Out> button
Power
Saver