Table of Contents
Advertisement
Extension Copy
FF9
Extension
Copy
Software Version: CPC-S and CPC-M, Version 1 .O and higher
Address:
FF9 2# (SourceExtPort)# (TargetExtPort)##
Description
Use this program to copy all the attributes of one extension to another.
Copying must be done on an extension-by-extension basis. The first
extension port number of this address is the extension being copiedfrom (the
source); the second extension port number is the extension being copied to
(the target).
Programming
Note: You must enter two pound-signs (#H#) at the end of this address.
FF9 2# (l-16
or l-24)#
(l-16 or l-24)##
f
(Source) Extension Port
z
(Target) Extension Port
CPC-s: 1-16
CPC-M: l-24
Notes
Copying Restrictions. This program copies all extension attributes except the
extension number, telephone type, extension lockout code, and EM/24 port
number (BLF port setting).
Consideration for Call Forward ID Codes. Do not use this program to copy
settings from an extension with a Call Forward ID Code. If the copied
extension settings include a Call Forward ID Code, the copy "target" will be
able to retrieve the messages of the copy "source." For example, if you copy
extension settings from station 200 to station 300, station 300 will be able to
retrieve 200's messages. Station 300 can retrieve 200's messages because the
Call Forward ID Code for 200 is also assigned to 300.
9-4
DBS 824-10-400
l&d
3/l/95
Advertisement
Chapters
Table of Contents
