Headset Operation - Panasonic DBS 824 Installation Manual

Attendant Features
Headset ODeration
Headset Operation
(CPC-S and CPC-M)
Description
A headset can be connected to attendant or non-attendant phones. (Dial tone
is normally turned off when the headset is connected.)
Operation
To use a headset:
1. Connect a headset to the telephone.
2. Press the ON/OFF key.
3. Press "#51."
The ON/OFF LED remains lit.
To stop using a headset:
Repeat the preceding steps.
Hardware Requirements
l
Headsets are not provided with the DBS 824; they must be purchased
separately.
l
Most commercially available headsets (with ECM mike transducers) can
be used.
.
Issued 3/l/95
DBS 824-10-700 2-13