Install Opl Port - Panasonic DBS 824 Installation Manual

Install
OPL Port
FFl
Install OPL
Port'
Software Vekion: CPC-S and CPC-M, Version 1 .O and higher
Address:
FFl 2# 1# 35# (0-2)#
Description
This program enables or disables an OPL (Option Port Line) on CO ports 1
and 2. OPL can connect to external devices such as a fax or answering
machine in parallel to the DBS 824 system, sharing the CO ports with the
system.
Programming
FFl 2# 1# 35# (0,
1. or 2)#
O=No OPL port installed (default).
l=OPL is installed on CO port 1.
2=OPL is installed on CO ports 1 and 2.
Notes
Power-Down Requirement.
After enabling an OPL port (selecting "1" or
"2" in this address), reset the system-by powering it off, then back on.
Otherwise, the OPL extension will constantly ring.
Port Operation with OPL. While OPL is using the CO port, the system will
not be able to access that port. When OPL is not using the CO port, the
system can access that port for trunk calls; while the system is using the port,
the OPL will not be able to access it. When the CO port receives an incoming
call, either the system or the OPL device can answer it; the one which
answers more quickly (system or OPL) will be connected to the incoming
call.
Page l-40
DBS824-10-400 Issued 3/l /95