Panasonic DBS 824 Installation Manual page 559

Call
Hold Key Telephone Features
l
The phone issues intercom dial tone.
l
"Hold TRK #XX" (where "XX" is the outside line number) appears on the
display.
To release a call placed on System Hold from the extension that
placed it there:
Press the line key that is flashing green.
l
The line LED stops flashing and remains lit.
l
"CO TALK #XX" (where "XX" is the outside line number) appears on the
display.
To release a call placed on System Trunk Hold from a different
extension:
Press the line key that is flashing red.
l
The line LED turns green and stops flashing.
l
"CO TALK TRK #XX" (where "XX" is the outside line number) appears
on the display.
Reia ted Programming
l
FFl (System): Attendant Hold Recall Timer for CO Calls
l
FFl (System): Attendant Hold Recall Timer for Intercom Calls
l
.- FFl (System): Extension Hold Recall Timer for CO Calls
l
FFl (System): Extension Hold Recall Timer for Intercom Calls
. FF1 (System): Key Bank Hold
l
FFl (System): Non-Appearing Trunk Hold
Considerations
l
When using an outside line for which there is no line key on your
extension, press the
HOLD
key to place the call on hold and then press a
vacant line key. Release the held call by pressing
HOLD
again. (System
programming determines whether the call will be placed on Exclusive
Trunk Hold or System Trunk Hold.)
3-16
DBS 824-l O-700 Issued 3/l /95