Table of Contents
Advertisement
FF3
Forced Least Cost Routing
Forced Least Cost Routing
Software Version: CPC-S and CPC-M, Version 1.0 and higher
Address:
FF3 (ExtPort)# 4## (0 or l)##
Description
Use this address to set individual extension(s) for forced Least Cost Routing
(LCR). If an extension is set for forced LCR, the caller must dial "9" or press
an FF key programmed for ECR in order to initiate an outside call. (The
caller will now hear a dial tone generated by the DBS 824 -- but the system
will not access an outside line until the caller dials an area code and office
code, after which the system selects the least expensive trunk.)
LCR is an automatic routing feature in which the DBS 824 selects the trunk
with the least expensive carrier for outside calls. LCR can be based on time
of day, the carrier assigned to the trunk, and/or the dialed number. Use the
FF8 program addresses to customize the LCR feature for your system.
Programming
.
I
FF3 (l-16 or
l-24)#
4## (0 or
l)#
f
t
Extension Port:
CPC-S: 1-16
CPC-M: l-24
O=Forced LCR is off.
l=Forced LCR is on.
Related Programming
Least Cost Routing: All FF8 programs
Issued 3/l /95
DBS 824-10-400
3-7
Advertisement
Chapters
Table of Contents
