Pbx Settings; Pbx Access Code(S - Panasonic DBS 824 Installation Manual

FFl
PBX Access Code(s)
PBX, Settings
PBX Access Code(s)
Soflware Version: CPC-S and CPC-M, Version 1 .O and higher
Address: FFl 2# 3## (l-8)# (O-999 or O*-99*)#
Description
The DBS 824 can dial up to 8 different PBX access codes. These codes can
be one, two, or three digits long. This feature is used when the DBS 824 is
installed behind a PBX and has toll restrictions enabled. The feature prevents
the DBS 824 from regarding the PBX access code digit(s) as part of a dialed
number.
Programming
To program an access code . . .
FFl 2# 3# (108)# (O-999 or O*-99*)#
Access Code Numb& Access Code Required To Dial The PBX
(*=wildcard; press FFll to enter it)
To reset access codes to default . . .
FFl 2# 3## (I-8)# CONF ON/OFF
i'
Access Code Number
Related Programming
Trunk Port Type: FF2 (Trunk)# lO#
.
Issued 3/l 195
DBS 824-l O-400
Page 1-53