System Speed Dial Numbers - Panasonic DBS 824 Installation Manual

System Speed Dial Numbers
Software Version: CPC-S and CPC-M, Version 1 .O and higher
Address: FFlO l# (SSD)# (PhoneNumber)#
Description
Use this program to set up System Speed Dial (SSD) codes and their related
phone numbers. The range of available SSD codes depends on the CPC card
installed in your DBS 824 system, and on the speed-dial mode selected (using
program address FFl 2# l# 33#). In Standard mode, up to 90 SSD numbers
can be programmed; in Add-On mode, up to 200 SSD numbers.
Table 10-l. System Speed Dial ranges
CPC Card Standard Mode
CPC-s 00-89
CPC-M 00-89
Add-On Mode
(not available)
ooo- 199
Programming
To assign a System Speed Dial number . . .
I
FFlO 1# (SSD)# (NNNNNNNNNNNNNNNN)#
f
t
I
SSD Code
Phone Number Sent To CO
(see Table lo- 1 above)
(up
to 16 digits)
To clear a System Speed Dial number . . .
FFlO 1# (SSD)# CONF ON/OFF
t
SSD
Code
Related Programming
Speed Dial Mode:'.FFl 2# l# 33#
Override Toll Restriction with SSD Numbers: FFl 2# l# 4# (SSD)##
SSD Display Restriction: FFl 2# l# 5#
SSD Name Display: FFl 2# l# 18# (0 or l)#
System Speed Dial Names: FF6 2# (SSD)#
issued 3/l/95 DBS 824-10-400 IO-3