Panasonic DBS 824 Installation Manual page 230

FFl
DISA Outbound Call ID Code
1
DISA Outbound Call ID Code 1
Software Version: CPC-S and CPC-M, Version 1.0 and higher
Address: FFl 6# l# (0000-9999)#
Description
Once a DISA caller has entered the system, he/she can make an outside call
after entering a valid ID code.
This program sets the first of two valid DISA Outbound Call ID Codes. The
system will accept either code to give the DISA caller an outside line. (The
purpose of having two Outbound Call ID Codes is to be able to track two
groups of DISA callers on SMDR reports.)
Programming
To assign the DISA Outbound Call ID Code 1 . . .
FFl 6# 1# (000019999)#
4
I-
4-Digit ID Code
(Defauit=llll)
To reset the ID
code to the
default value . . .
FFl 6# l# CONF ON/OFF
Related Programming
DISA
Auto Answer: FF2
(Trunk)# ll# (0
or l)#
DISA Inbound Call ID Code: FFl 5# (0000-9999)#
DISA Outbound Call ID Code 2: FFt 6# 2# (OOOO-9999)#
DISA Start Tie: FF2
(Trunk)# 19#
(HHMM)#
DISA End Time: FF2 (Trunk)# 20# (HHMM)#
Issued
3/l /95 DBS 824-l O-400 1-119