Table of Contents
Advertisement
FFl
Automatic Pause Position For PBX Access Codes
To reset an automatic pause to default . . .
FFI 2# 3# (9
to
18)# CONF
ON/OFF
t
First Digit of PBX Access Code
(see table, previous page)
Examples
Inserting a pause after the PBX access code "9X" . . .
To insert a pause after the PBX access code "9X" is dialed, enter this address
("X" represents the numbers O-9):
FFl 2# 3## 17# 2#
This sequence will insert a pause between the "9X" and the rest of the dialed
digits. For example,
91+ PAUSE + 404-555-5793
Insetting a pause after the PBX access code "8" . . .
To insert a pause after the PBX access code "8" is dialed, enter this address:
FFl 2## 3# 16## l#
This sequence will insert a pause between the "8" and the rest of the dialed
digits. For example,
8 + PAUSE + 404-555-5793
Related Programming
Automatic Pause Timer:
FFl 3# lO##
Automatic Pause for PBX Line: FF2 (Trunk)# 13#
Issued 3/l/95
DBS 824-10-400
Page155
Advertisement
Chapters
Table of Contents
