Table of Contents
Advertisement
FFl
Least Cost Routing (LCR) Access
Least Cost Routing (LCR) Access
Software Version: CPC-S and CPC-M, Version 1 .O and
higher
Address:
FFl 2#
l# 3##
(0 or
l)#
Description
This program specifies whether Least Cost Routing (LCR) is used when "9"
is dialed before making an outside call.
Programming
I
FFl 2#
l# 3# (0 or l)#
f
O='Y indicates a pooled-trunk call.
1="9" indicates an LCR call.
Related Programming
Forced Least Cost Routing: FF3 (ExtPort)# 4##
LCR Program Settings: FF8 (all)
tiotes
. Restriction With Call For-w&d-Outside Feature. LCR will not work with
the Call Forward-Outside feature. If LCR is activated (the above address is
set to "l"), extensions set to Call Forward-Outside must use trunk groups l-6
(trunk group."9" cannot be used). See Section 700-Feature Operation for
more information.
Required Hardware Setting. To use LCR, Strap 53 on the
CPC
card must be
cut.. See Section 300-Installation for instructions.
FCC Registration. Different FCC registration numbers are used for the DBS
824, depending on whether LCR is activated. See Section 300~Installation
for more information.
Issued 3/l 195
DBS 824-l O-400
Page 1-7
Advertisement
Chapters
Table of Contents
