Pooled Trunk Access For Groups "8 - Panasonic DBS 824 Installation Manual

Pooled Trunk
Access for Groups "81-86"
FF2
Pooled Trunk Access for Groups ('81-86"
Software Version:
CPC-S
and
CPC-M,
Version 1.0 and higher
Address: FF2 (Trunk)# (4-9)# (0 or l)#
Description
Use this feature to place a trunk in a group from which trunks are
automatically chosen for outbound dialing. When you dial 81,82, 83,
84,85
or 86 from an SLT or digital extension, or press an FP key that is set as a
pooled trunk key, any available trunk in the group will be accessed.
The trunk selection in a particular group is made from the highest available
trunk number to the lowest available trunk number.
Programming
I
1
FF270,,.8~#7# (Oojly
Trunk Number:
CPC-S: l-6
CPC-M: l-8
Pooled Trunk Group: _ O=The trunk is not
4==Group 81
included.
5=Group 82
l=The trunk is included.
6=Group 83
7=Group 84
8=Group 85
9=Group 86
Notes
Placing Trunks In More Than One
Group. The same trunks may appear in
more than one pooled trunk group, including trunk group 9.
Required Hardware Seting.
To use pooled trunks, Strap J3 on the CPC card
must
be cut See Section 300~Installation
for instructions.
2-6
DBS 824-10-400 Issued 3/l /95