Screened Transfer - Panasonic DBS 824 Installation Manual

SLT Features Call Transfer
l
F'FI (System):Extension Transfer Recall Tuner for Intercom Calls
Considerations
l
In order for users to transfer calls by flashing the switchhook, dialing the
extension, and going onhook, the Onhook Transfer feature must be
enabled.
l
You cannot transfer a call to an extension that has Do Not Disturb or
Absence Message activated.
l
You can transfer a call to an extension that has Call Forwarding activated.
The transferred call will follow the call forwarding path of the extension it
is transferred to.
For example, if extension "A" is covered to extension "B," calls that are
transferred to extension "A" will be forwarded to extension "B."
l
When you transfer a call to an extension that is busy or does not answer
and does not have Call Forwarding activated, the transfer will recall your
extension after the Transfer Recall Tier expires.
Screened Transfer
Description
Using the Screened Transfer feature, you can contact a third party via an
extension before transferring a call to that party.
Operation
Transfer:
To use Screened Transfer when your system is set for Onhook
1. Flash the switchhook to place the call on hold.
The phone issues intercom dial tone.
2. Dial the extension number to which the call is to be transferred.
3. When your call is answered, inform the third party of the transfer.
4. Replace the handset
The third party need only pick up the handset to speak to the outside l&e.
Issued 3/l 195
DBS
824-l O-700
5-15