Table of Contents
Advertisement
Introduction to DBS 824 Programming
Understanding
FF Key Programming
4. Press the desired
FF key..
Notes:
l
Name settings can only be programmed
from the attendant telephone or a
DSS console connected to it.
l
When you enter the programming
mode through an attendant phone, the
system will automatically change to the "Night" mode. After exiting the
programming
mode, the system will return to the' appropriate Day/Night/
Night 2 mode according to the system clock and the mode's start time.
From a Non-Attendant
Port
When programming
from a display telephone other than an attendant, follow
\
these steps:
1. Press ON/OFF.
2. Dial #98.
.
3. Enter the programming
authorization code (9999 by default).
4. Press PROG.
5. Press the pound sign twice (##).
6. Press the desired FF key, and proceed with programming.
Example Programming Entry
If you're unfamiliar with DBS programming,
use the following example to
guide you through a simple programming
change.
This example explains how to set the DBS time and date from an attendant
phone.
1. Press [ON/OFF],
[PROG] (YF"isdisplayed),
#
("FW
is displayed),
#
("Program
Mode"
is displayed on line 1;
"MAIN MODE"
is displayed on line
2).
Issued 3/l /95
DBS 824-l O-400
Intro-7
Advertisement
Chapters
Table of Contents
