Panasonic DBS 824 Installation Manual page 499

Night Service System Features
l
The ON/OFF LED lights.
2. Dial "#521." (Note: #520 can be used to toggle between modes.)
3. Press the ON/OFF
key.
l
The ON/OFF LED goes off.
l
"DAY MODE" appears on the display.
Related Programming
l
FFl (System): Extension Class of Service Setting
l
FFl (System): Ring Patterns for UNA Terminals (M, C, & B)
l
FF3 (Extension): Extension Class of Service Assignment
l
FF4 (Ringing and Hunt Groups): CO Day Ring Assignments
l
FF4 (Ringing and Hunt Groups): CO Night Ring Assignments
l
FF4 (Ringing and Hunt Groups): CO Night2 Ring Assignments
Hardware Requirements
l
Calls during Night Mode are often indicated by external paging speakers or
an external ringing device, such as a night bell. External paging and
ringing devices are not provided with the DBS 824, they must be
purchased separately.
Considerations
l
Day, Night and Night 2 modes can be assigned to F'F keys on an attendant
phone. The attendant can switch between Day, Night and Night 2 modes
simply by pressing the appropriate key. The FF key lights red when the
system is in the assigned mode. Alternatively a DAY/NTGHTl/NIGHTZ.
toggle mode kay can be assigned. Pressing thekey toggles the mode. When
in Day mode, theFF key LED is not lit. When in NIGHT1 mode, the LED
lights red. When in NIGHT2 mode, the LED lights green.
l
If the same mode key is assigned on different attendant positions, each key
indicates the current mode. For instance, if a NIGHT1 key is assigned for
two attendants, both light when in
NIGHT1
mode.
l
If the system is programmed to switch between night and day modes
automatically, you cannot switch between modes by using the "#520/#521/
#522/#523."
l-26 DBS 824-l O-700 lsslle Date 3/l/95