Extension Ring Pattern - Panasonic DBS 824 Installation Manual

Extension Ring Pattern FF3
Extension Ring Pattern
Software Version: CPC-S and CPC-M, Version 1.0 and higher
Address: FF3 (ExtPort)# 38# (Pattern)#
Description
Use this feature to assign a distinctive ringing pattern for incoming trunk calls
to individual extension(s). There are 9 different patterns to choose from (see
table below). Each address setting represents two different ring patterns; the
pattern actually used will depend on the type of phone (digital or analog)
plugged into the extension port.
,
Programming
Settings l-9 in this address will override the ring pattern assigned to the
trunk
(FF2 Trunk# 17#). Setting 0 (default) will use the ring pattern assigned to the
trunk.
FF3 (1-l 6 or i-24)# 36## (0-9)#
t
t
Extension Port:
Ring Pattern
CPC-S: 1-16 (Default=O; see the
CPC-M: l-24
following table)
Table 3-10.
Extension ring patferns
3-42
DBS 824-l O-400
Issued
3/l 195