Cpc And Mfru Options - Panasonic DBS 824 Installation Manual

Cabinet Installation
CPC and MFRU Options
Card Installation
Figure 3-4 YPC strap J3
l
Before installing the CPC card, determine if the DBS 824 will be used as a
KSU or PBX. To use as a PBX, cut Strap 53 on the CPC. Cutting this strap
allows use of pooled trunks as opposed to line appearances.
CPC-S and CPC-M
l
Before installing a CPC-M card, determine if the optional MFRU (2
DTMF) Circuit Card is to be installed (VB-4243 1). If used, attach the
MFRU to the CPC Circuit Card as shown below:
Figure 3-5. MFRU circu& card attachment to CPC
ADJUSTMENT
Note: Use VRl (also labeled DRT for DISA Ring Tone) to adjust the volume
for DISA internal ringing.
Issued 3/l /95
DBS 824-l O-300
3-7