Table of Contents
Advertisement
FFl
Call Duration Timer
Call Duration Timer
Software Version: CPC-S and CPGM, Version 1 .O and higher
Address:
FFl 2# 1# 32# (0,l or 2)#
Description
This timer determines how long the system waits before displaying call
duration timing on the phone's LCD. For example, if the timer is
set to 5
seconds, the call duration timer will appear 5 seconds after an outgoing
number is dialed, or 5 seconds after an incoming call is answered. This timer
allows Caller ID information (if available) to appear before the call duration
timing is displayed.
Programming
I
FFl 2#
l# 32# (0,l
or
2)#
.
A
0=5 seconds
1=16 seconds
2=30 seconds
Related Programming
Call Duration Display: FF12# l# l# (0 or l)##
SMDR Staq Timer for CO Calls: FFl 2# l# 2# (0,l or 2)#
Notes
Interaction With SMDR.
This Call Duration Tier
only
affects
the display
of call duration. The system begins the actual
timing
of the call according to
the SMDR Start Tier address (FFl 2# l# 2#). In order for call duration
to
be displayed, SMDR timing must start before call duration display begins (the
Call Duration Tuner must be equal to or greater than the SMDR Start Tier).
lnferaction
With Caller
ID. The setting
for this Call Duration Timer will be
the actual length of time that Caller ID information is displayed before the
LCD changes to call duration timing.
Issued 3/l /95
DBS 824-l O-400
Page
l-37
Advertisement
Chapters
Table of Contents
