International Calling On Extensions - Panasonic DBS 824 Installation Manual

FF7 International Calling on Extensions
International Calling on Extensions
Software Version: CPC-S and CPC-M, Version 1 .O and higher
Address: FF7 1# 18#/ (ExtPort)# (0 or l)#
Description
This address applies only to systems programmed to use the new NANP
dialing plan (FF'7 l# 16#). It also applies only to TRS types 3-6 (TRS types
O-2 do not allow international dialing; TRS type 7 allows all dialing).
Use this address to allow or restrict international calling on individual
extension(s) that are "exceptions to the rule". When an extension attempts an
overseas call (trunk access + 01 or 011) on a trunk assigned TRS type 3-6, the
system checks the setting in this address (default=restrict call). However, if
this address is set to "l", the system checks the "International Calling For
TRS Types 3-6" (FF7 l# l#) to see if the dialed country code should be
checked against the Country Code Table (IV7 l# 19#) before allowing the
call. If so, and if the dialed country code is included in the table, the call is
allowed.
Programming
FF7 1# 16## (l-16 or l-24)# (0 or l)#
r'
f
Extension Port
O=Restrict
CPC-S: 1-16
l=Check the International
CPC-M: l-24 Calls Switch (FF7 l# l#)
Related Programming
International Calling For TRS Types 3-6: FF7 l# l# (0 or l)#
Dialing Plan Switch: FF7 l# 16## (0 or l)#
Country Code Table: F'F7 l# 19# (Table)# (Code)#
Notes
Restricted
calls. If the system determines the call is restricted during any
stage of the process, it sends a busy tone to the user and displays "Restricted"
on the phone.
Interaction with
TRS
Qpes.
The "International Calling on Extensions"
setting is not checked for TRS types O-2 or 7. International calls are always
restricted for TRS types O-2, and always allowed for type 7.
Issued 3/l /95
DBS 824-l O-400
7-13