Second Attendant Position - Panasonic DBS 824 Installation Manual

FFl Second Attendant Position
Second Attendant Position
Software Version: CPCS and CPC-M, Version 1.0 and higher
Address: FFl 2# l# 22# (lOl-699)#
Description This address assigns a key phone as the second attendant position. The next
two addresses (FFl 2# l# 23# and FFI 2# l# 24#).can be used to assign third
and fourth attendant positions.
When all line appearances at the frost attendant are busy, calls will transfer in
sequence to the second, third, and fourth attendants. If all line appearances
are busy on all attendants, calls will aansfer to the Attendant Transfer
Extension (if assigned).
Programming
To assign a second attendant . . . .
FFl 2# l# 22# (101 to 699)#
!
Extension Number (101-699)
(Default=lOl)
To clear the second attendant bosition . . .
I
FFl 2# 1# 22# CONF ON/OFF
I
Related Programming
Third Attendant Position: FFl 2# l# 2% (lOl-699)#
Fourth Attendant Position: FFl 2# l# 24## (lOl-699)#
Attendant Transfer Extension: FFl 2# l# 25## (lOl-699)##
Notes Programming Rest&ions When Extensions Are Not Instdled An
extension must be installed at the port assigned as the second attendant before
the second attendant can be cleared. Likewise, an extension cannot be
programmed as
a
second attendant unless it is physically assigned.
Issued 3/l J95 DBS 824-l O-400
Page l-27