Smdr Data (Serial Port Cnl; Parity Check (Smdr - Panasonic DBS 824 Installation Manual

Parity Check (SMDR)
FFl
SMDR Data (Serial Port CNl)
Parity Check (SMDR)
Sofhnrare Version: CPC-S and CPC-M, Version 1 .O and higher
Address: FFl 2# 2# l# (0 or l)##
Description
This program determines whether the DBS 824 uses parity checking over
serial port CNl, which is normally dedicated for SMDR.
If this address is set to "on," use FFl 2# 2# 2# (0 or l)# to select even or odd
parity.
Programming
FFl 2# i# 1# (0 or l)#
f
O=Turns off the parity check.
l=Turns on the parity check.
Related Programming
Odd/Even Parity (SMDR): FFl 2# 2# 2# (0 or l)#
Notes
Checking Communications Parameters. Be sure to properly set all
communication programming addresses when modifying any single address
value. Communication parameters for SMDR are set with addresses FP12#
2# 1 through 9#.
Page1-44 DBS 824-10-400
Issued 3/l/95