Co Day Ring Assignments - Panasonic DBS 824 Installation Manual

CO Day Ring Assignments
Software Version: CPC-S and CPC-M, Version 1.0 and higher
Address: FF4 l# (ExtPort)# (Trunk)## (0 or l)#
Description
This program determines which extension(s) will receive incoming calls from
a particular trunk when the DBS 824 system is in "Day" mode.
Programming
FF4 l# (l-17 or l-25)# (l-6 or l-8)# (0 or
I)#
Extension Port
Trunk Number O=Trunk does not ring.
CPC-S: 1-16, 17
CPC-S: l-6
l=Trunk rings.
CPC-M: l-24,25
CPC-M: l-8
.
NOTE:
Use port 17 (CPC-S) or port 25 (CPC-M) to assign ringing
to an external paging or Universal Night Answer (UNA) device.
Related Programming
Automatic Day Mode Start Time: FFl 3# 2% HHMM#
Notes
Defaz&A#endant Ring Assignments. All trunks are set by default to ring on
ports 1 and 2 (the first and second attendants).
Routing of Tanks Thai Have Not Been Assigned to Ring. All unassigned
ringing trunks will be directed to the attendant.
Issued 3/l/95 DBS824-lo-400 4-3