Key Bank Hold - Panasonic DBS 824 Installation Manual

FFl
Key Bank Hold
Key Bank Hold
Soft&are Version: CPC-S and CPC-M, Version 1.0 and higher
Address: FFl 2# l# 9# (0 or l)#
Description
Use this program address to enable or disable the Key Bank Hold feature in
the DBS 824 system.
If Key Bank Hold is enabled, a phone user can switch back and forth between
trunk calls (by pressing the FF key for each trunk) without placing the current
trunk on hold. Also, an attendant phone can press a DSS/BLF key to
automatically transfer a trunk call to an extension without pressing HOLD
first. In both of these scenarios, the DBS 824 will automatically place the
current trunk call on system hold when the phone user presses the FF key or
DSS/BLF key.
If Key Bank Hold is disabled (default setting), the phone user must press
HOLD before accessing a second trunk or transferring a call.
Programming
I
FFl 2# l# 9# (0 or l)#
f
I
O=Key Bank Hold is disabled.
l=Key Bank Hold is enabled.
issued 3/l /95 DBS 824-l O-400 Page 1-13