Door Phone Ring Pattern - Panasonic DBS 824 Installation Manual

Door Phone Ring Pattern FFl
Door Phone Ring Pattern
Software Version:
WC-S
and CPC-M, Version 1 .O and higher
Address: FFl W 3# (DoorPhone)# 6## (015)#
Description
This program
specifies the ring
pattern of the tone that will be heard through
the speaker of the designated extension's phone when a door phone caller
rings to get in. In this programming address, you will specify the number of
seconds between rings (the ring itself has a fixed duration of approximately 3
seconds).
Programming
FFl 8# 3# (l-4)# 6## (O+#
Door Phone Number
Numbe.r of Seconds Between Rings:
(l-4)
O=Rings one time only (no repeat ringing)
1=4 seconds between rings
2=6
seconds between rings
3=8 seconds between rings
4=10 seconds between rings
5= 12 seconds between rings
Related Pro&-amming
Door Phane Ring Timer: FFl 8# 3# (DoorPhone)# 5# (0- 15)#
Notes
If changing the Ring Pattern setting, activate the change by unplugging the
door phone from its port and plugging it back in.
1-128 DES 824-10-400
issued 3/l/95