Table of Contents
Advertisement
Automatic DISA Callers
FF1
Caller ID Automatic DISA
Automatic
DISA Callers
Software Version:
CPC-M Only (Version 1.0 and above)
Address:
FFl 2# 8## (l-lO)# (PhoneNo.)#
Description
Use this program to assign up to 10 phone numbers for the Caller ID
Automatic DISA (Direct Lnward System Access) feature. When a caller (e.g.,
company salesman) calls from one of the phone numbers assigned in this
address, the trunk receiving the call will automatically switch to DISA
without requiring the caller to enter an ID Code.
The DISA feature gives the caller access to inside features normally available
only to another extension.
Note: In order to use the Automatic DISA feature, the DBS 824 system must
have a CPC-M card and the Caller ID package installed.
Programming
FFl 2# 8# (l-l 0)# (PhoneNo.)#
'f
t
Phone Number Assignment
Caller's Phone Number
(up to 10 digits)
Related Programming
DISA Auto Answer: FP2 (Trunk)# 11# (0 or l)#
Trunk C&&Type:
FF2 (Trunk)# 21# (0 or l)##
Notes
Ma.tching The Caller's Phone Number. The
caller's phone number entered
in the above programming address must exactly match the phone number
received by Caller ID (usually 10 digits).
Assigning DISA Trunks.
If the Caller ID Automatic DISA feature is used,
do not assign any trunks as DISA trunks (see "DISA Auto Answer" address
'
FF2 Trunk++ ll#). The Caller ID feature will automatically switch the trunk
to DISA bzxd on the originating phone number.
Hardware Requirement For DISA.
An MFR card is reqtired for DISA, so
that the system can interpret DTMF tones entered via the DISA connection.
l-70
DBS 824- 1 O-400
issued 3/l 195
Advertisement
Chapters
Table of Contents
