Speed Dial Mode - Panasonic DBS 824 Installation Manual

Speed Dial Mode
FFl
Speed Dial Mode
Sofhware Version: CPC-S and CPC-M, Version 1.0 and higher
Address: FFl 2# l# 33# (0 or l)#
Description
This program determines the mode for speed-dialing (both Personal and
System). This speed-dial mode setting affects the
range
of speed-dial
numbers that can be created,
as
well as
the number
of
digits in
the speed-dial
numbers, as shown in the following table:
Table I-4. Speed-dial number ranges in Standard and Add-On modes
CPC-s:
SSD Number Range:
Standard Mode Add-On Mode .
00439
N/A
PSD Number Range:
CPC-M:
SSD Number Range:
PSD Number Range:
90-99
N/A
Standard Mode Add-On Mode
00-89
000-199
90-99
900-939
Proarammina
FFl ,2# 1# 33#I
(0 or
l)#
f
O=Standard Mode
l=Add-On Mode
NOTE: Default is 0 for CPC-S;
default is 1 for CPC-M.
Related Programming
System Speed Dial Numbers: FFlO l#
Personal Speed Dial Numbers: FFlO 2#
Notes
Standard Mode for CPC-S.
The CPC-S model supports only Standard mode:
the Add-On mode setting is disabled.
Changing Speed-Dial Modes.
If changing from Standard mode to Add-On
mode, or vice versa, the system should be powered-off then back on to enable
the new mode setting. The speed-dial number ranges will also change as a
result of the mode change; see Chapter 10,
Speed Diuf Programming (FFIi)),
for more information about these changes.
Page 1-38
DBS 824-l O-400 Issued 3/l /95