Table of Contents
Advertisement
Hunt Group Members
FF4
Hunt Group Members
Software Version: CPC-S and CPC-M, Version 1.0 and higher
Address:
FF4 3# (HuntGrp)# (520)# (ExtNumber)#
Description
Use this program to assign an extension to a hunt group, and determine its
sequential position within the hunt group. Up to 16 positions are available in
each hunt group. The extension numbers entered in this address must already
be assigned to extension ports in address FF3 (ExtPort)# l# (lo-69 or lOO-
699)##. An extension cannot belong to more than one hunt group.
Note: A pilot number must be assigned to the hunt group in address FF4 3#
(l-4)# l# (11-69 or lOl-699)#, in order for the hunt group feature to work.
However, do not include the pilot number here in Hunt Group Members.
Programming
To assign an extension number to a position in a hunt group . . .
FF4 3#I (l-4)#
(520)#
(lo-69
or lOO-699)#
Hunt Group Number-
CPC-S and CPC-M: l-4
Hunt Group Position (5-20)
Extension Number
5=Position 1
13=Position 9
lo-69 or loo-699
6=Position 2
14=Position 10
7=Position 3
15=Position 11
8=Position 4
16=Position 12
9=Position 5
17=Position 13
1 O=Position 6
18=Position 14
11 =Position 7
19=Position 15
12=Position 8
20=Position 16
To remove an extension number from a hunt group . . .
FF4 3# (l-4)#
(5-20)# CONF ON/OFF
Hunt Group Number'
'
CPC-S and CPC-M: l-4
Position in Hunt Group (5-20)
NOTE:
The extension must be idle while you are removing it
from the hunt
group;
otherwise, it will not be removed.
4-12
DBS 824-l O-400
Issued 3/l /95
Advertisement
Chapters
Table of Contents
