Multi-Line (Ml) Appearances - Panasonic DBS 824 Installation Manual

Key Telephone Features
Line Appearances
Multi-Line (ML) Appearances
(CPC-S and CPC-M)
Description
You can make and receive both CO line calls and Intercom Calls using a
Multi-Line (ML) key.
See "ML/MC0 Separation" (page 3-54) for information on assigning both
ML and MC0 keys to the same system.
Operation
Operation
To
originate an intercom or trunk call
Action
Press an idle MC0 key. The key blinks
1 (green) as the call is made.
I
To pIace a call on Exclusive Hold (page 3-29)
To place a call on System Hold (page 3-15)
To transfer a call
Press the MC0 key.
Press the HOLD key.
Press HOLD, dial the destination exten-
sion, then press PROG.
i
Related Programming
l
FFl (System): Least Cost Routing (LCR) Access
l
FF2 (Trunks): Pooled Trunk Access for Group "9"
l
F'FS
(LCR): LCR Settings (all)
Considerations
l
A Multi-Line key will ring for incoming CO calls, Intercom Calls, recall
calls, and call-forward calls.
l
When a CO call or an Intercom Call arrives, a search begins for a Multi-
Line key not in use. The lower numbered F'F keys wiLl,be searched first.
When a free Multi-Line key is found, the LED flashes green and the
extension rings.
Issued 3/l/95
DBS 824-l O-700
3-53