Table of Contents
Advertisement
Call Waiting
DSLT Features
4. Dial "8."
The third party need only pick up the handset to speak to the outside
ihe.
5. Replace the handset,
Related Programming
l
FFl (System): Onhook (Automatic) Transfer
l
FFl (System): Recall Timer for Extension -Transferred CO Calls
l
FFl (System): Recall Tier for Extension -Transferred CO Calls
Considerations
l
You cannot transfer a call to an extension that has Do Not Disturb or
Absence Message activated.
l
You can transfer a call to an extension that has Call Forwarding activated.
The transferred call will follow the call forwarding path of the extension it
is transferred to.
For example, if phone "A" is covered to phone "B," calls that are
transferred to phone "A" will be forwarded to phone "B."
l
When you transfer a call to an extension that does not answer and does not
have Call Forwarding activated, the transfer recalls to your extension after
the Transfer Recall Timer expires.
Call Waiting
(CPC-S and CPC-M)
Description
You can send a Call Waiting signal, followed by a brief LCD message, to a
busy extension. The party receiving the message need only replace the
handset and then pick it up again to be automatically connected to your
extension.
The following messages can be sent using the Call Waiting feature:
4-16
DBS 824-l O-700
Issued 3/l /95
Advertisement
Chapters
Table of Contents
