Ml/Mc0 Separation - Panasonic DBS 824 Installation Manual

FF3 ML/MC0 Separation
ML/MC0 Separation
Software Version: CPCS and CPC-M, Version 1.0 and higher
Address: FF3 (ExtPort)## 43# (0 or l)#
Description
Use this address to program an extension to have MC0 (Multi-CO) or ML
(Multi-Line) FF keys.
The difference between ML and MC0 has to do with incoming calls. MC0
means multiple trunks can be received at the extension -- if you press a
flashing FF key, you will get an incoming trunk call. Calls from another
extension will flash on the "EXT" LED (not through the FF key).
ML, on the other hand, means you can receive either a trunk call or an
extension call on an FF key, which will flash for either type of call.
..-
If this address is set to ML, each FF key must be individually enabled for ML/
MC0 using program address FF5 (ExtPort)# (Key)# (FeatureCode)#.
Programming
FF3 (l-16 or l-24)# 43# (0 or l)#
/ t
Extension Port: O=MCO keys
CPC-S: 1-16
l=ML keys
CPC-M: l-24
Note:
The default for the first
attendant position is " 1," rather
than "0."
Related Programming
FF Key Assignments for Extensions: FF5 (ExtPort)# (Key)## (Feature)#
Issued 3/l/95 DBS 824-l O-400
3-49