Door Phone Ring Assignments - Panasonic DBS 824 Installation Manual

Door Phone Ring Assignments
FFl
Door Phone Ring Assignments
Software Version: CPC-S and CPC-M, Version 1 .O and higher
Address: FFl 8## 3## (DoorPhone)# 2# (ExtPort)# (0 or l)#
Description
Use
this
program to determine which extension(s) will ring when a door
phone
caller initiates a call. It is possible to assign several or all extensions
to
ring for a door phone call.
Programming
FFl 6## 3## (1-4)#' 2# (l-16 or l-24)# (0
f
+
r l)#
Door Phone Number
(l-4)
Extension Port Number: O=Do not ring.
CPC-S: (1-16)
l=Ring.
CPC-M: (l-24)
Related Programming
Door Phone Extensions: FFl 8# 317 @oorPhone)# l# (ExtPort)##
Door Phone Tone Type: FF1 8# 3# (DoorPhone)# 4## (0 or l)#
Door Phone Ring Timer:. FFl 8# 3# (DoorPhone)# 5# (0-15)#
Door Phone Ring Pattern: FFl 8# UI (DoorPhone)# 6# (0-5)#
Notes
Znteractibn With SLT Phones. An SLT phone (no speaker) can receive a
door phone call (same ring pattern as a normal intercom call).
Zn&mc?ion With ML Keys. 3.f the extension is programmed as an ML key, it
can receive a door phone call while the extension is on another call (the phone
will "buzz"). However, the door phone call will not transfer to
another
extension, even if the phone is programmed to transfer (the phone will
continue to buzz, until the user picks it up).
Conference Calling Resb-icths for Door Phones. Door phone calls cannot
be part of a conference call, nor are they subject to Busy Override.
1-124 DES 824-l O-400 Issued 3/l 195