Panasonic DBS 824 Installation Manual page 607

One-Touch Keys
Key Telephone Features
To assign access codes to a One-Touch key:
1. Press the
ON/OFF
key.
l
The phone issues intercom dial tone.
l
The ON/OFF LED lights.
2. Press the PROG
key.
3.. Press the One-Touch key to be programmed.
4. Enter the access number.
5. Press the
REDIAL
key.
This inserts a pause between the access code and the telephone number.
6. Press the HOLD
key.
7. Press the ON/OFF
key.
The ON/OFF LED goes off.
To check a programmed One-Touch key:
1.
2.
3.
4.
Considerations
.
Press the ON/OFF key.
l
The phone issues intercom dial tone.
l
The ON/OFF LED lights.
Press the CONF key.
"C" appears in the display.
Press the One Touch key to be checked.
The programmed data appears on the display.
Press the ON/OFF
key.
l
The ON/OFF LED goes off.
l
The date and time appears on the display.
.
Lf the pause following
an
access code is too short, press the
REDIAL
key
more than once.
3-64
DBS 824-l O-700
Issued 3/l 195