Attendant Transfer Extension - Panasonic DBS 824 Installation Manual

Attendant Transfer Extension
FFl
Attendant Transfer Extension
Software Version: CPC-S and CPC-M, Version 1 .O and higher
Address:
FFl 2# 1# 25#
(1
Ol-699)#
Description
Addresses FFl 2# l# 24# through FFl 2# l# 26#+ can be used to assign
second, third, and fourth attendants. When all line appearances at the first
attendant are busy, calls will transfer to the second, third, and fourth
attendants in sequence. If all line appearances are busy on all attendants, calls
will transfer to the extension assigned in this address.
Programming
To assign an attendant transfer extension . . .
Notes
FFl 2# l# 25## (101
to
699)#
f
Extension Number (101-699)
(Default=No transfer extension assigned:
To reset the attendant transfer extension to the default
value . . .
I-
I
FFl 2# l# 25# CONF ON/OFF I
Pilot Number Resiricfim. The ovefflow position must be an installed
extension; it cannot be a hunt group pilot number.
Page1-30 DBS 824-10-400 Issued 3/l/95