Panasonic DBS 824 Installation Manual page 571

Call Waiting/OHVA Text Reply
Key Telephone Features
l
If Onhook Call Transfer has been enabled and you have placed an outside
line on hold to answer Call Waiting, replace the handset after the other \.
extension hangs up. If the caller hangs up first, the held calf will be
transferred to the called extension.
l
Call Waiting cannot be sent to an ML key.
Call Waiting/OHVA Text Reply
(CPC-S and CPC-M)
Description
When a busy party receives an indication of incoming intercom call, the busy
party can respond by sending a text message back to the caller.
The text message can be sent after any of these intercom call indications:
l
Call waiting tone
l
Call waiting tone followed by a text message
l
An offhook voice announce.
Operation
When you are on a call and receive an indication of a incoming intercom call,
press
CONF
and then dial 1-5.
The following table shows the default text associated with messages l-5.
1 Message Number
1 Message Definition 1
1 Take A M&G&Y]
2
1 Please Hold
3 . 1 Will CallBack
1
4
I Transfer
5
1 Unavailable 1
Messages l-5 can be changed through system programming.
Programming
l
FF6 (Names and Messages): Call Waiting/OHVA Text Reply
3-28 DBS 824- 1 O-700
Issued 3/l /95