Extension Numbers - Panasonic DBS 824 Installation Manual

FF3
Extension Numbers
Extension Numbers
Software Version: CPC-S and CPC-M, Version
1.0
and higher
Address: FF3 (ExtPort)# l# (lo-69 or lOO=699)#
Description This program assigns an extension number to an extension port. An
extension
number
is the 2-digit or 3-digit number that is dialed to reach the
extension phone; extension numbers are programmable and can be changed.
An extension port is the physical location (RJll jack) into which the phone is
plugged; ports have fixed numbers which can't be changed.
Programming
To assign an extension number . . .
FF3 (l-16 or l-24)# I# (lo-69 or 100-699)#
f +
Extension Port:
CPC-S: 1-16
CPC-M: l-24
Extension Number
(Defaults: Port l=lO or 100;
,
Port2=11 or 101; Port 3=12
or 102: etc.)
To,clear an extension number . . .
*,.
.
FF3
(l-16
or l-24)# 1# CONF
NOTE: After clearing an extension number, the port is inoperative
until an extension number is reassigned to it, and the phone is
unplugged from the system and then plugged back in.
Related Programming
Extension Number Digits: FFl 277 l# 12# (0 or l)-###
Extension Names: FF6 l# (ExtPort)# CONF (Name)#
Notes
Default Extension Numbers for Attendants. The default extension number
for the attendant is 10 or 100. Extension 100 cannot be assigned to a different
port. If a second attendant is assigned, its default extension number is 11 or
101. However, the second attendant can be assigned a different extension.
number. If extension 101 or 11 is deleted, the alternate attendant is canceled.
Issued 3/l /95
DBS 824-l O-400
3-3