Odd/Even Parity (Maintenance Port) - Panasonic DBS 824 Installation Manual

Odd/Even Parity (Maintenance Port)
FFl
Odd/Even Parity (Maintenance Port)
Software
Version: CPC-S and CPC-M,
Version 1.0 and higher
Address: FFl 2# 9# 2# (0 or l)#
Description
If the parity check for Maintenance port CN2 has been set (FFl 2# 9# l#),
this option determines whether the check is based on an even count or an odd
count.
Programming
FFl 2# 9# 2# (0 or l)#
t
O=Odd parity.
l=Even parity.
Notes
Checking Communications Parameters. Be sure to properly set all
communication programming addresses when modifying any single address
value. Communication parameters for Maintenance are set with addresses
FF12# 9#I l# through 6#.
l-72
DBS 824- 1 O-400
Issued 3/l 195