Automatic Pause For Pbx Line - Panasonic DBS 824 Installation Manual

Automatic Pause for PBX Line
FF2
Automatic Pause for PBX Line
Software Version: CPC-S and CPC-M, Version 1.0 and
higher
Address: FF2 (Trunk)# 13# (0
or
l)#
Qescription
This address determines if a pause is
automatically
inserted during the
dialing
of a PBX access code.
If this address is enabled, the system will automatically pause after dialing the
first second or third digit of the PBX access code: see program address FFI
2# 3# (9- 18)# ( 1-3)# for more information.
If this address is disabled (default setting), the phone user must manually
insert a pause by pressing REDIAL. The length of the pause (whether
inserted manually by the user or automatically by the system) is determined
by the Automatic Pause Timer, which is set at address FFl 3# lO#+.
Note: Before assigning the automatic pause, you must fust designate the
trunk as a "PBX line" (FF2 Trunk# lO## 2#).
Programming
FF2 (l-6
or
l-8)# 13#
(0
or l)#
t
Trunk Number:
CPC-S: l-6
CPC-M: l-8
O=Autornatic pause is enabled.
l=Automatic pause is disabled.
Related Programming
$uyrtic Pause Position for PBX Access Codes: FFl 2# 3# (9-18)#
Automatic Pause Timer: FFl 3# lO# (0- 15)#
Trunk Port Type: FF2 (Trunk)# lO# (1 or 2)#
2-10
DBS 824-l O-400
Issued 3/l /95