Third Attendant Position; Fourth Attendant Position - Panasonic DBS 824 Installation Manual

FFl
Fourth Attendant Position
Fourth Attendant Position
Software
Version: CPC-S and CPC-M, Version 1.0 and
higher
Address: FFl 2# l# 24## (lOl-699)#
Description This address assigns a DBS 824 key phone as the fourth attendant position.
The previous two addresses (FFl 2# 1# 22# and FFl 2# l# 23#) can be used
to assign second and third attendant positions.
When all line appearances at the frost attendant are busy, calls will tzansfer in
sequence to the second, third, and fourth attendants. If all line appearances
are busy on all attendants, calls will transfer to the Attendant Transfer
Extension (if assigned).
Programming
To
assign a fourth attendant . . .
FFl 2# 1# 24# (101
to
699)#
t
Extension Number (101-699)
@efault=No
fourth attendant assigned
j
To reset the fourth attendant position to the default value . . .
FFl 2# 1# 24# CONF ON/OFF
Related Programming
Second Attendant Position: FFl 2# l# 22# (lOl-699)#
Third Attendant Position: FFl 2# l# 23# (lOl-699)#
Attendant Transfer Extension: FFl 2# l# 2% (101-699)#
Notes '
Programming Restktions When Extensions Are Not Instdled An
extension must be installed at the port assigned as the fourth attendant before
the fourth attendant can be cleared. Likewise, an extension cannot be
programmed as a fourth attendant unless it is physically assigned.
Issued
3/l/95
DBS 824-l O-400
Page l-29