Handsfree Answerback - Panasonic DBS 824 Installation Manual

Handsfree Answerback Key Telephone Features
l
If a new code is programmed into a key, the previously programmed code
is erased.
l
To erase a code programmed into a key, press the HOLD key when the
display reads "Enter Code." " Code Cleared" then appears on the display.
l
The system can be programmed so that Pooled Trunk Access calls
automatically use LCR when 9 is selected.
l
Night Service, DND, and BGM can be activated through FF keys without
lifting the handset.
l
When you are making a call using the Speed Dialing feature, the FLASH
key stored in Speed Dialing becomes the PBX flash feature.
Handsfree Answerback
(CPC-S and CPC-M)
Description
Use the Handsfree Answerback feature to answer a call without lifting the
handset. Your extension must be programmed for Voice Calling for you to use
this feature. If your extension is not set for Voice Calling, the caller must
press "1" during a call to switch from Tone Calling to Voice Calling.
Operation
1. Confii that the MUTE LED is off.
If it is lit, press the MUTE key to turn it off.
2. Speak into the microphone.
Related Programming
l
FFl (System): Extension Intercom Calling
Considerations
,
l
Stay within three feet of the microphone.
l
The MUTE feature can be selected from the Menu screen on large display
phones. With other DBS 824 key phones, the MUTE function is assigned
to a fixed key.
3-42
DBS 824-l O-700
issued 3/l 195