Lcr Delete Tables - Panasonic DBS 824 Installation Manual

FF8
LCR Delete Tables
LCR Delete Tables
Software Version: CPC-S and CPC-M, Version 1 .O and higher
Address: FF8 7# (l-4)# (NNNNNNNNNNNNNNNN)#
Description
Use this program to assign deletion digits to a trunk group. When LCR uses
the trunk group, it checks the beginning digits of the dialed number against
the deletion digits. If the beginning digits match the deletion digits, they are
automatically deleted from the dialed number. The deleted digits are never
outpulsed.
Programming
To create an LCR Delete Table . . .
(NNNNNNNNNNNNNNNN)#
t
LCR Trunk Group
Deletion Digits
(up to 16 digits)
To clear an LCR Delete Table . . .
FF8 7# (l-4)# CONF ON/OFF
t
LCR Trunk Group
Notes Deletion First, Addition Next. If digits are being added and deleted from the
same trunk group, the DBS will delete digits first, then add digits.
Issued 3/l 195
DBS 824-l O-400 8-15