Table of Contents
Advertisement
FF9
FF Key Copy
FF Key Copy
Software Version:
CPC-S and CPC-M, Version 1 .O and higher
Address:
FFQ 3#/ (ExtPort)#
(ExtPort)#B#
Description
Use this program to copy all the attributes of one extension's FF keys to
another. Copying must be done on an extension-by-extension basis. The fist
extension port number of this address is the F'F key source, and the second
extension port number is the FF key target.
.
Programming
Note: You must enter two pound-signs (##) at the end of this address.
FF9 3# (l-16 or l-24)# (l-16 or l-24)###
f'
z
(Source) Extension Port
(Target) Extension Port
CPC-S: l-16
CPC-M: l-24
Notes
Copying Restriction. This program only copies the settings of FF keys that
are equipped with LEDs. Settings for F'F keys without LEDs are not copied.
Clearing FF Keys Before Using the Copy Program. Before you copy the FF
keys to an extension that is set to the defaults, you must clear the key settings
of the target phone. To clear key settings, use address FF5 (ExtPort)# (Key)#
CON-F ON/OFF.
Setting Up FF Keys on Multiple Phones. To set up multiple extensions with
new FF key settings, use the following steps:
1. Clear the keys of the source phone using FF5 (ExtPort)## (Key)#.
2. Copy the cleared key settings to multiple target extensions using FF9 3#
(SourceExtPort)# (TargetExtPort)#.
3. Set up the FF keys on the source phone using FF5 (ExtPort)# (Key)++.
4. Copy the new settings to multiple target extensions using FF9 3#
(SourceExtPort)# (TargetExtPort)#.
Issued 3/l/95
DBS 824-l O-400
9-5
Advertisement
Chapters
Table of Contents
