Special Lcr Area Codes - Panasonic DBS 824 Installation Manual

FF8 Special LCR Area Codes
Special LCR Area Codes
Software Version: CPC-S and CPC-M, Version 1 .O and higher
Address: FF8 3## (l-4)# (000-999)#
Description
Four special area codes can be specially chosen for LCR routing. In DB S 824
progamming, the special area codes are assigned numbers 1,2,3, and 4.
The special area codes are tied to four special LCR office code tables. An
"office code table" is the group of office codes associated with a special area
code. The offrce code tables can contain an unlimited number of office codes.
This arrangement allows a broad range of numbers to be dialed by the least
costly route.
This operation keys off the first six digits dialed, where the first three digits
represent an area code, and the second three digits represent an office code.
Programming
To
assign a special
LCR
area code . . .
FF87# (OOOT
I
Special Area Code Number (l-4) Area Code
I
To clear a special LCR area code . . .
FF8 3# (114)# CONF ON/OFF
/
Special Area Code Number (l-4)
Related Programming
Time Priority Route Tables: FF8 5# (Table)# (Position)# (TrunkGrp)#
Notes
FLASH Key Interaction. Once a trunk is accessed through LCR, the
FLASH key cannot be used to get second dial tone. The flash operation is
disabled to prevent second calls from being placed over inappropriate routes.
Issued 3/l/95
DBS 824-10-400 8-9