Table of Contents
Advertisement
FF2
Private Trunk Line
Private Trunk Line
Software
Version: CPC-S and CPC-M, Version 1.0 and
higher
Address:
FF2 (Trunk)#
12#
(ExtPort)#
Description
Use this address to assign a private trunk line to an extension.
A number of
private
trunks can belong to one extension, but the same private trunk cannot
be
assigned to multiple extensions.
Once a private trunk is assigned to an extension, other extensions cannot
make outbound calls or receive inbound calls on that trunk (the system will
assign Toll Restriction Type 0 to the trunk on all other extensions). The
system will assign TRS Type 7 (no restrictions) to the private trunk assigned
to the extension.
Programming
To
assign a private trunk line(s)
to
an extension . . .
FF2 (l-6 or l-8)#
12# (1716 or l-24)#
f
Extension Port Number:
Trunk Number:
CPC-S: l-6
CPC-M: l-8
WC-S: l-16
CPC-M: l-24
To cancel private trunk assignment(s) for an extension . . .
FF2 (l-6 or l-S)# 12# (l-16 or l-24)# CONF ON/OFF
=v*
Related Programming
Day TRS Types O-7 for Trunks: FF7 7# (ExtPort)#'(Trunk)# (0-7)#
Night TRS Types
O-7
for Trunks: FF7 8# (ExtPort)# (Trunk)# (0-7)#
Notes
Reprogramming Toll Restrictions
for
Disabled Private Trunks. If
a private
trunk setting is disabled, the system will
not
automatically
make that trunk
available to other extensions. (TRS Type 0 will apply to that trunk on all
extensions.) Therefore, the trunk's TRS type must be manually
reprogrammed for each extension wishing to use that trunk (using addresses
FF7 7#
and
FF7 8#).
issued 3/l f95
DES 824-l O-400
".
2-s
Advertisement
Chapters
Table of Contents
