Centrex/Pbx Compatibility; Direct Inward System Access (Disa) - Panasonic DBS 824 Installation Manual

Centrex/PBX Compatibility
System Features
Users can assign an FF key to flash when there are new entries in the log.
When the user presses the key to access the log, the LED turns off.
-
Call Logs can be assigned to both attendant and non-attendant extensions.
Centrex/PBX Compatibility
(CPC-S and CPC-M)
Des&p tion
Centrex/PBX Compatibility allows the DBS 824 to be connected to centrex
or PBX lines.
The DBS 824 supports up to 8 access codes for dialing centrex or a PBX.
These access codes allow the DBS 824 SMDR output to exclude the number
dialed to reach a centrex or PBX line.
The DBS 824 also supports transmission of a flash signal over the centrex or
PBX link.
Re!ated Programming
l
FFl (System): PBX Access Code(s)
l
FF2 (Trunks): Trunk Type
l
FF8 (LeastCost Routing): LCR Add Tables
Considerations
l
The LCR Add Table can be used to prefix digits for outgoing calls through
Centrex.
Direct Inward System Access (DISA)
* (CPC-S and CPC-M)
Description
Direct Inward System Access (DISA) gives off-site users dial-in access to the
DBS 824. Users access DISA by dialing in on the DISA trunk.
1-14
DBS 824-l O-700 Issue Date 3/l/95