Table of Contents
Advertisement
Line Appearances
Operation
r-
Operation
Key Telephone Features
I Action
To
originate a trunk call
Press an idle MC0 key.
The key blinks (green) as the call is made.
(
To
place a call on Exclusive Trunk Hold (page 3-29) ) Press the MC0 key.
) To place a call on System Trunk Hold (page 3-15)
1 Press the HOLD key.
To transfer a call
Press HOLD, dial the destination exten-
sion, then press PROG.
Related Programming
'
FFl (System): Least Cost Routing (LCR) Access
FF2 (Trunks): Pooled Trunk Access for Group "9"
FF2 (Trunks): Pooled Trunk Access for Groups "8 l-86"
FF3 (Extension): Forced Least Cost Routing
FF4 (Ringing): Ringing and Hunt Groups (all)
FF5 (Keys): FF Key Assignments (all)
FFS (LCR) LCR Settings (all)
Considerations
.
.
.
.
When all trunks in a group are busy, all of the corresponding MC0 keys
light red.
If LCR is enabled, MC0 keys can be assigned for trunk group 89.
However, the FF keys will not light.
Trunk lines flash red..
There are seven groups of outside lines: 9 and 81-86.
Press the MC0 key that flashes green to answer an outside call.
If there are multiple outside calls, lift the receiver (or ON/OFF) to speak to
the first one. If more than one call comes in from an extension, then the
second receives busy tone.
3-52
DBS 824- 1 O-700
issued 3/l /95
Advertisement
Chapters
Table of Contents
